| Zugriffsnummer | 55243 |
| Dokumenttyp | Zeitschriftenartikel |
| Peer Review | mit Peer Review |
| Sprache | Englisch |
| Titel | Report on EURAMET Supplementary Comparison Measurement of Steel Tapes of 10 m and 50 m |
| Autor(in); Institution |
Wedde, Martin; 5.4, Interferometrie an Maßverkörperungen, PTB-Braunschweig
Bergstrand, Sten; RISE Research Institutes of Sweden AB, Borås, SWEDEN
Ačko, Bojan; Metrology Institute of the Republic of Slovenia /University of Maribor-Faculty of Mechanical Engineering /Laboratory for Production Measurement, Maribor, SLOVENIA
Alqahtani, Faisal A.; Saudi Standards, Metrology and Quality Organisation, Riyadh – Al Muhammadiyah – in front of King Saud University, Riyadh , SAUDI ARABIA
Arce, Aelio A.; Centro Español de Metrologia (CEM), Madrid, SPAIN
Aşar, Muharrem; Ulusal Metroloji Enstitüsü, Gebze, Kocaeli, TURKEY
Bajić, Gordana; Montenegrin Bureau of Metrology (MBM), Arseija Boljevica bb,Podgorica, MONTENEGRO
Bastida, Karina; Instituto Nacional De Tecnologia Industrial Física y Metrología, San Martín, Buenos Aires, ARGENTINA
Chen, Wen-Jen; Center for Measurement Standards (CMS)/ITRI, East Dist., Hsingchu City, TAIWAN (R. O. C.)
Czulek, Dariusz; Central Office of Measures, Warszawa, POLAND
Darmaa, Unurbileg; Mongolian Agency for Standardization and Metrology, Ulaanbaatar-13343, MONGOLIA
Po Er, Hsu; Center for Measurement Standards (CMS)/ITRI, East Dist., Hsingchu City, TAIWAN (R. O. C.)
Hánek, Pavel; Research Institute of Geodesy, Topography and Cartography, Zdiby, CZECH REPUBLIC
Karlsson, Helge; Justervesenet – Norwegian Metrology Service, Kjeller, NORWAY
Kübarsepp, Toomas; AS Metrosert, Talinn, ESTONIA
Kruusla, Holger; AS Metrosert, Talinn, ESTONIA
Lechner, Jiri; Research Institute of Geodesy, Topography and Cartography, Zdiby, CZECH REPUBLIC
Matus, Michael; Bundesamt für Eich- und Vermessungswesen, Wien, AUSTRIA
Pirée, Hugo; FPS Economy, DG Quality and Safety, Metrology Division, Brussels, BELGIUM
Saraiva, Fernanda; Instituto Português da Qualidade, Caparica, PORTUGAL
Svedova, Larisa; LNMC, LTD Metrology Bureau LATMB, Riga, LATVIA
Szikszai, Gábor; Government Office of the Capital City Budapest, Budapest, HUNGARY
Tamakyarska, Denita; Bulgarian Institute of Metrology (BIM), Sofia, BULGARIA
Xue, Zi; National Institute of Metrology (NIM), Chaoyang Dist, Beijing, P. R. CHINA
Fiala, Daniel; 5.4, Interferometrie an Maßverkörperungen, PTB-Braunschweig
|
| Quelle/Jahr | Metrologia: 62 (2025), 1A, 124 S. |
| ISSN | 0026-1394 (print) ; 1681-7575 (online) |
| DOI | |
| Verlag | Bristol: IOP Publishing |
| Freie Schlagworte | Length metrology ; surveying tapes ; measurement tapes ; supplementary comparison ; artefact aging ; BIPM KCDB ; CIPM MRA |
| Zusammenfassung | Measurement tapes are a classic and widely used measuring tool in dimensional metrology. High volume commercial tapes play an important role in business transactions and official measurements. In addition, there are also extremely high-quality measurement tapes acting as transfer standards for the dissemination of the SI unit metre. The calibration of such transfer standards or measuring instruments with the lowest possible measurement uncertainties is a standard task for NMIs with a high economic relevance. The EURAMET.L-S2.3.n01 supplementary comparison on measurement of steel tapes of 10 m and 50 m was carried out between 2018 and 2025 with 20 participants. The Physikalisch-Technische Bundesanstalt (PTB) acted as pilot laboratory. National metrology institutes (NMIs) and designated institutes (DIs) from four regional metrology organisations (RMOs) participated: fourteen institutes from EURAMET were joined by three institutes from APMP, one from GULFMET and one from SIM. The comparison results generally supported the measurement capabilities of the international dimensional metrology community in the field of tape calibration for high quality tapes. Especially in case of commercial grade tapes, the comparison results clearly show that the scale marker quality must be carefully assessed, individually for each tape. Besides, a small, but systematic and persistent change of the artefact properties due to the repeated mechanical elongation was observed, even for standards of decades of age. The pilot control measurements could be successfully used to mitigate this typical challenge for a round robin. |
| Kostenfreier Zugang | Freier Zugang |
| Themenbereich der Metrologie | Länge, dimensionelle Metrologie |
Zitierung
Pollinger, F., Wedde, M., Bergstrand, S., Ačko, B., Alqahtani, F. A., Arce, A. A., Aşar, M., Bajić, G., Bastida, K., Chen, W.-J., Czulek, D., Darmaa, U., Po Er, H., Hánek, P., Karlsson, H., Kübarsepp, T., Kruusla, H., Lechner, J., Matus, M., Pirée, H., Saraiva, F., Svedova, L., Szikszai, G., Tamakyarska, D., Xue, Z., Fiala, D., Köchert, P., Gao, S., & Meyer, T. (2025). Report on EURAMET Supplementary Comparison Measurement of Steel Tapes of 10 m and 50 m. Metrologia, 62(1A), 124 S. https://doi.org/10.1088/0026-1394/62/1A/04003