| Zugriffsnummer | 54578 |
| Dokumenttyp | Konferenzartikel |
| Peer Review | mit Peer Review |
| Sprache | Englisch |
| Titel | Metrological infrastructure for traceable electric insulation testing for a reliable electricity grid |
| Autor(in); Institution |
Meisner, Johann; 2.3, Elektrische Energiemesstechnik, PTB-Braunschweig
Gerdinand, Frank; 2.3, Elektrische Energiemesstechnik, PTB-Braunschweig
Rovira, Jorge; Fundación para el Fomento de la Innovación (FFII), SPAIN
Roccato, Paolo; Istituto Nazionale di Ricerca Metrologica (INRIM), Torino, ITALY
Agazar, Mohamed; LNE Laboratoire national de métrologie et d'essais, FRANCE
Klüss, Joni; Research Institutes of Sweden AB (RISE), SWEDEN
Merev, Ahmet; VTT Teknologian tutkimuskeskus VTT Oy, FINLAND
Hällström, Jari; VTT Teknologian tutkimuskeskus VTT Oy, FINLAND
Lahti, Kari; TAU Tampere University, FINLAND
Ghaffarian Niasar, Mohamad; Technische Universiteit Delft (TU Delft), Delft, THE NETHERLANDS
Pischler, Oliver; Technische Universität Graz (TUG), Graz, AUSTRIA
Schichler, Uwe; Technische Universität Graz (TUG), Graz, AUSTRIA
Arcones del Álamo, Eduardo; Universidad Poltécnica de Madrid (UPM), Madrid, SPAIN
Fey, Tobias; HIGHVOLT Prüftechnik Dresden GmbH, Dresden, GERMANY
Schorn, Heribert; Institute for International Product Safety GmbH (I2PS), Bonn, GERMANY
Vaessen, Peter; KEMA BV, THE NETHERLANDS
Kujda, Mateusz; Haefely AG, SWITZERLAND
|
| Quelle/Jahr | International Symposium on High Voltage Engineering 2025 (ISH2025):(2025), 1 - 6 |
| Availability | [online only] |
| DOI | |
| Verlag | Zenodo |
| Konferenzangaben | 24th International Symposium on High Voltage Engineering (ISH 2025), Karuizawa, 24-29, August, 2025, Japan |
| Freie Schlagworte | calibration service for steep voltage testing ; calibration service for puncture testing ; insulation tests ; impulse current testing ; traceable calibration of high bandwidth high current sensors |
| Zusammenfassung | One of the European Union's objectives under the Green Deal is a clean and secure energy supply, which is undergoing a major revolution due to structural and technological changes. Transient processes and superimposed high-frequency components generated by converter technology have a negative or even destructive influence on the existing grid equipment. The insulating capacity of devices and components need to be traceably tested for these challenges. Therefore, a consortium of six National Metrology Institutes (NMI), four European universities and four industrial partners in the field of high voltage and high current testing started the international metrology research project "Metrological Infrastructure for Traceable Electrical Insulation Testing for a Reliable Electricity Grid - ELITE". This project addresses the development of measurement techniques, references and calibration capabilities to enable beyond state-of-the-art transient high voltage and high current testing. As part of this project reference standards, calibration capabilities and validated techniques for the evaluation of very fast high-voltage impulses for steep-voltage testing will be developed. The influence of steep-voltage rise time on the insulation material properties will be investigated and recommendations, such as good practise guides will be provided publicly. Furthermore, traceable measurement systems and calibration services for puncture testing and impulse current testing using highly energetic impulse currents that comply with IEC 62475 requirements (e.g. 200 kA and 10/350 μs) will be developed. Finally, calibration facilities and reference standards for time-domain and frequency characterisation of high current sensors used in e.g. short circuit tests that conform with IEC 62475 Annex C and IEC 60947 requirements will be established. |
| Kostenfreier Zugang | Freier Zugang |
| Rechteinformation | CC BY 4.0 ; Creative Commons Attribution 4.0 License |
| Themenbereich der Metrologie | Elektrizität und Magnetismus |
| Forschungsprojekt | European Partnership on Metrology - 24GRD05 ELITE |
| Förderinformationen (1) |
Förderername: European Commission (EC)
Förderer ID: 0000 0001 2242 8989 Förderer ID Typ: ISNI Förderprogramm: European Partnership on Metrology Titel der Förderung: 24GRD05 ELITE: Metrological infrastructure for traceable electrical insulation testing for a reliable electricity grid Förderungsnummer: 24GRD05 ELITE |
Zitierung
Meisner, J., Gerdinand, F., Rovira, J., Roccato, P., Agazar, M., Klüss, J., Merev, A., Hällström, J., Lahti, K., Ghaffarian Niasar, M., Pischler, O., Schichler, U., Arcones del Álamo, E., Fey, T., Schorn, H., Vaessen, P., & Kujda, M. (2025). Metrological infrastructure for traceable electric insulation testing for a reliable electricity grid. 24th International Symposium on High Voltage Engineering (ISH 2025), Karuizawa, 24-29, August, 2025, Japan. https://doi.org/10.5281/zenodo.15600830