| Zugriffsnummer | 52878 |
| Dokumenttyp | Zeitschriftenartikel |
| Peer Review | mit Peer Review |
| Sprache | Englisch |
| Titel | Experimental evaluation of various flow meters using gaseous CO2 |
| Autor(in); Institution |
Brown, Russell; TÜV SÜD National Engineering Laboratory, East Kilbride, UK
Chinello, Gabriele; TÜV SÜD National Engineering Laboratory, East Kilbride, UK
Workamp, Marcel; VSL National Metrology Institute, Delft, THE NETHERLANDS
|
| Quelle/Jahr | Flow Measurement and Instrumentation: 99 (2024) |
| Artikelnummer | 102672 |
| ISSN | 1873-6998 (online) |
| DOI | |
| URL | |
| Verlag | Amsterdam: Elsevier |
| Zusammenfassung | The need for accurate flow measurement within the Carbon Capture, Utilisation and Storage (CCUS) transport network is widely reported and understood as a requirement of Emission Trading Schemes and commercial contracts. In meeting this requirement, traceable calibration is needed in conditions which closely mimic the process conditions. However, currently accredited calibration facilities cannot meet the conditions for calibrating in gaseous CO2 and so a likely alternative solution for these custody transfer flow meters is to be calibrated with an alternative fluid and the calibration transferred. In this article, which was produced under the framework of the EMPIR project “Metrology for Decarbonising the Gas Grid”, the authors will investigate this approach with a number of flow meters tested in natural gas, nitrogen gas and finally in carbon dioxide gas at varying pressures. The results of which will suggest that orifice and Coriolis meters can be calibrated in another fluid however, an ultrasonic meter would require further work and potentially require calibration in CO2. This article will also investigate the effects of impurities in a CO2 gas stream for a rotary displacement flow meter and a thermal mass flow controller compared against a piston prover which provides a primary reference flow standard. |
| Kostenfreier Zugang | Open Access Hybrid |
| Rechteinformation | CC BY 4.0 ; Creative Commons Attribution 4.0 License |
| Themenbereich der Metrologie | Durchfluss |
| Innovationscluster | Energie |
| Geschäftsfelder | Metrologie für die Gesellschaft ; Metrologie für die Wirtschaft |
| Forschungsprojekt | 20IND10: Decarb: Metrology for decarbonising the gas grid |
| Förderinformationen (1) |
Förderername: European Commission (EC)
Förderer ID: 0000 0001 2242 8989 Förderer ID Typ: ISNI Förderprogramm: EMPIR 2020 Industry Titel der Förderung: 20IND10: Decarb: Metrology for decarbonising the gas grid Förderungsnummer: 20IND10 URI der Förderung: http://www.decarbgrid.eu/ |