Zugriffsnummer 50436
Dokumenttyp Konferenzartikel
Peer Review unbekannt
Sprache Englisch
Titel Challenges in designing a 10 kV skin effect trace heating system
Autor(in); Institution
Koch, Florian; 3.5, Explosionsschutz in der Energietechnik, PTB-Braunschweig
Lienesch, Frank; 9, Gesetzliche und internationale Metrologie, PTB-Braunschweig
Becker, Paul; nVent Thermal Management, CA, USA
Parman, David; nVent Thermal Management, CA, USA
Quelle/Jahr 2022 IEEE IAS Petroleum and Chemical Industry Technical Conference (PCIC):(2022), 337 - 345
Artikelnummer PCIC-2022-36
ISSN 2161-8127 (online) ; 0090-3507 (PoD)
ISBN 978-1-6654-9717-6 (PoD) ; 978-1-6654-9716-9 (online)
DOI
Verlag IEEE
Konferenzangaben 69th Petroleum and Chemical Industry Committee Conference, Denver, Colo., 26-29, September, 2022, USA
Freie Schlagworte Skin effect trace heating ; Partial discharge ; Ignition testing ; Explosion protection ; Hazardous locations
Zusammenfassung A risk assessment for operating a skin effect trace heating system at 10 kVac in hazardous locations was conducted. The primary risk identified was the possible occurrence of electrostatic and partial discharges containing sufficient energy to trigger an explosion. Several skin effect insulated conductor (cable) designs were assessed against this risk by performing partial discharge measurements and ignition proof testing as a function of voltage and temperature. Certification according to the IECEx product scheme for increased safety "eb" was carried out by using I EC 60079-33 to allow incorporation of the type tests in IEEE Std 844.1-2017/CSA C22.2 No. 293.1-17 and by including the ignition tests from IEC 60079-7. It was found that the transferred charge could be substantially reduced by incorporating a semi-conductive shield around the insulation layer in the skin effect insulated conductor. With this shielded configuration, ignition in an explosive atmosphere did not occur up to the test voltages required for a 10 kVac rating.

Zitierung

Koch, F., Lienesch, F., Becker, P., & Parman, D. (2022). Challenges in designing a 10 kV skin effect trace heating system. 69th Petroleum and Chemical Industry Committee Conference, Denver, Colo., 26-29, September, 2022, USA. https://doi.org/10.1109/PCIC42668.2022.10181254

Exportieren

PTB-Publica MenĂ¼

Sprache wechseln: uk flag