| Zugriffsnummer | 50164 |
| Dokumenttyp | Konferenzartikel |
| Peer Review | unbekannt |
| Sprache | Englisch |
| Titel | Status of the demonstration of the critical technologies of the ATHENA telescope |
| Autor(in); Institution |
Ferreira, Ivo; European Space Agency, ESTEC, Noordwijk, THE NETHERLANDS
Bavdaz, Marcos; European Space Agency, ESTEC, Noordwijk, THE NETHERLANDS
Ayre, Mark; European Space Agency, ESTEC, Noordwijk, THE NETHERLANDS
Wille, Eric; European Space Agency, ESTEC, Noordwijk, THE NETHERLANDS
Shortt, Brian; European Space Agency, ESTEC, Noordwijk, THE NETHERLANDS
Fransen, Sebastiaan; European Space Agency, ESTEC, Noordwijk, THE NETHERLANDS
Collon, Maximilien J.; cosine Research B.V., Warmond, THE NETHERLANDS
Vacanti, Giuseppe; cosine Research B.V., Warmond, THE NETHERLANDS
Barrière, Nicolas M.; cosine Research B.V., Warmond, THE NETHERLANDS
Landgraf, Boris; cosine Research B.V., Warmond, THE NETHERLANDS
Riekerink, Mark Olde; Micronit B.V., Enschede, THE NETHERLANDS
Haneveld, Jeroen; Micronit B.V., Enschede, THE NETHERLANDS
Start, Ronald; Micronit B.V., Enschede, THE NETHERLANDS
van Baren, Coen; SRON Leiden, Leiden, THE NETHERLANDS
Ferreira, Desirée Della Monica; DTU Space, Technical University of Denmark, Lyngby, DENMARK
Massahi, Sonny; DTU Space, Technical University of Denmark, Lyngby, DENMARK
Svendsen, Sara; DTU Space, Technical University of Denmark, Lyngby, DENMARK
Christensen, Finn E.; DTU Space, Technical University of Denmark, Lyngby, DENMARK
Burwitz, Vadim; MPI für extraterrestrische Physik, Garching, GERMANY
Pareschi, Giovanni; INAF Osservatorio Astronomico di Brera, Merate (LC), ITALY
Tagliaferri, Gianpiero; INAF Osservatorio Astronomico di Brera, Merate (LC), ITALY
Salmaso, Bianca; INAF Osservatorio Astronomico di Brera, Merate (LC), ITALY
Basso, Stefano; INAF Osservatorio Astronomico di Brera, Merate (LC), ITALY
Moretti, Alberto; INAF Osservatorio Astronomico di Brera, Merate (LC), ITALY
Spiga, Daniele; INAF Osservatorio Astronomico di Brera, Merate (LC), ITALY
Valsecchi, Giuseppe; Media Lario S.r.l.,Bosisio Parini (LC), ITALY
Vernani, Dervis; Media Lario S.r.l.,Bosisio Parini (LC), ITALY
Lupton, Paul; Teledyne e2v, Chelmsford, Essex, UK
Mundon, William; Teledyne e2v, Chelmsford, Essex, UK
Phillips, Gavin; Teledyne e2v, Chelmsford, Essex, UK
Schneider, Jakob; Fraunhofer Institute for Material and Beam Technology, Dresden, GERMANY
Korhonen, Tapio; Opteon Oy, Piikkiö, FINLAND
Sanchez, Alejandro; ALBA Synchrotron, Barcelona, SPAIN
Heinis, Dominique; ALBA Synchrotron, Barcelona, SPAIN
Colldelram, Carles; ALBA Synchrotron, Barcelona, SPAIN
Tordi, Massimiliano; EIE Space Technologies Srl, Mestre-Venezia, ITALY
Willingale, Richard; University of Leicester, Leicester, UK
|
| Quelle/Jahr | International Conference on Space Optics — ICSO 2022:(2023), 1 - 14 |
| Artikelnummer | 127770Q |
| Schriftenreihe | Proceedings of SPIE: 12777 |
| DOI | |
| Verlag | Bellingham, Wash.: SPIE |
| Konferenzangaben | International Conference on Space Optics (ICSO 2022), Dubrovnik, 3-7, Oktober, 2022, Croatia |
| Freie Schlagworte | X-ray optics ; X-ray astronomy ; Athena, Silicon Pore Optics ; X-ray telescopes |
| Zusammenfassung | The ATHENA (Advanced Telescope for High ENergy Astrophysics) mission is the current 2nd ‘Large’ mission (L2) in the ESA Cosmic Vision programme currently. It is currently at Phase B1 but the mission concept will now enter a reformulation phase that will follow a design-to-cost approach. This paper describes the main technologies behind its reference X-ray telescope based on the modular Silicon Pore Optics (SPO) technology. The large X-ray mirror is the mission enabler being specifically developed for ATHENA, in a joint effort by industry, research institutions and ESA. All aspects of the optics are being addressed, from the mirror plates and their coatings to the mirror modules and their assembly into the ATHENA telescope, as well as the facilities required to build and test the flight optics, demonstrating performance, robustness, and programmatic compliance. An overview of the status of the design and demonstration of the telescope is given. The risks that have successfully been mitigated are made explicit and the remaining risks are identified. |
| Themenbereich der Metrologie | Photometrie und Radiometrie |
Zitierung
Ferreira, I., Bavdaz, M., Ayre, M., Wille, E., Shortt, B., Fransen, S., Collon, M. J., Vacanti, G., Barrière, N. M., Landgraf, B., Riekerink, M. O., Haneveld, J., Start, R., van Baren, C., Ferreira, D. D. M., Massahi, S., Svendsen, S., Christensen, F. E., Krumrey, M., Skroblin, D., Burwitz, V., Pareschi, G., Tagliaferri, G., Salmaso, B., Basso, S., Moretti, A., Spiga, D., Valsecchi, G., Vernani, D., Lupton, P., Mundon, W., Phillips, G., Schneider, J., Korhonen, T., Sanchez, A., Heinis, D., Colldelram, C., Tordi, M., & Willingale, R. (2023). Status of the demonstration of the critical technologies of the ATHENA telescope. International Conference on Space Optics (ICSO 2022), Dubrovnik, 3-7, Oktober, 2022, Croatia. https://doi.org/10.1117/12.2688840