Zugriffsnummer 42795
Dokumenttyp Zeitschriftenartikel Open Access Gold
Peer Review mit Peer Review
Sprache Englisch
Titel Characterization, calibration and validation of an industrial emissometer
Autor(in); Institution
Kononogova, Elena; 7.3, Detektorradiometrie und Strahlungsthermometrie, PTB-Berlin
Adibekyan, Albert; 7.3, Detektorradiometrie und Strahlungsthermometrie, PTB-Berlin
Monte, Christian; 7.3, Detektorradiometrie und Strahlungsthermometrie, PTB-Berlin
Hollandt, Jörg; 7.3, Detektorradiometrie und Strahlungsthermometrie, PTB-Berlin
Quelle/Jahr Journal of Sensors and Sensor Systems: 8 (2019), 1, 233 - 242
ISSN 2194-8771 (PRINT) ; 2194-878X (ONLINE)
DOI
Verlag Göttingen: Copernicus Publications
Zusammenfassung We report on the radiometric characterization and calibration of the TIR 100-2 (INGLAS Produktions GmbH, 2019) industrial emissometer. This instrument is used for handheld, on-site directional total emissivity measurements in industrial applications, e.g., the measurement of the emissivity of highly reflective thermal insulation materials. The diameter of the measurement field is determined by two different methods. The emissometer is calibrated with three different sets of low- and high-emissivity reference samples. Each calibration is validated by comparing the results of the TIR 100-2 to directional total emissivity results of the Emissivity Measurement in Air Facility (EMAF) at the Physikalisch-Technische Bundesanstalt (PTB), Berlin. Finally, the hemispherical total emissivity of highly reflective thermal insulation materials is determined using the TIR 100-2 according to the European Standard EN 12898, and, again, the results are validated with results obtained at the EMAF.
Kostenfreier Zugang Open Access Gold
Rechteinformation CC BY 4.0 ; Creative Commons Attribution 4.0 License
Themenbereich der Metrologie Thermometrie
Forschungsprojekt 16NRM06: EMIRIM: Improvement of emissivity measurements on reflective insulation materials
Förderinformationen (1) Förderername: European Commission (EC)
Förderer ID: 0000 0001 2242 8989
Förderer ID Typ: ISNI
Förderprogramm: EMPIR 2016 Normative
Titel der Förderung: 16NRM06: EMIRIM: Improvement of emissivity measurements on reflective insulation materials
Förderungsnummer: 16NRM06
URI der Förderung: http://projects.lne.eu/jrp-emirim/

Zitierung

Kononogova, E., Adibekyan, A., Monte, C., & Hollandt, J. (2019). Characterization, calibration and validation of an industrial emissometer. Journal of Sensors and Sensor Systems, 8(1), 233–242. https://doi.org/10.5194/jsss-8-233-2019

Exportieren

PTB-Publica Menü

Sprache wechseln: uk flag