| Zugriffsnummer | 41998 |
| Dokumenttyp | Zeitschriftenartikel |
| Peer Review | mit Peer Review |
| Sprache | Englisch |
| Titel | Final report on the force key comparison CCM.F-K3 |
| Autor(in); Institution |
Kumme, Rolf; 1.2, Festkörpermechanik, PTB-Braunschweig
Averlant, Philippe; Laboratoire national de métrologie et d'essais (LNE), Mechanical Metrology Division, Paris, FRANCE
Bartel, Tom; National Institute of Standards and Technology (NIST), Mass and Force Group, Gaithersburg, USA
Germak, Alessandro; Istituto Nazionale di Ricerca Metrologica (INRiM), Torino, ITALY
Knott, Andy; National Physical Laboratory (NPL), Teddington, UK
Man, John; National Measurement Institute (NMIA), Mass and Related Quantities, Sydney, AUSTRALIA
Medina, Nieves; Centro Español de Metrología (CEM), Madrid, SPAIN
Ostrivnoy, Alexander; D. I. Mendeleyev Institute for Metrology (VNIIM), Petersburg, RUSSIAN FEDERATION
Park, Yon-Kyu; Korea Research Institute of Standards and Science (KRISS), Center for Mass and Related Quantities, Daejon, REPUBLIC OF KOREA
Röske, Dirk; 1.2, Festkörpermechanik, PTB-Braunschweig
Seifarth, Rick L.; National Institute of Standards and Technology (NIST), Mass and Force Group, Gaithersburg, USA
Wozniak, Mikolaj; Central Office of Measures (GUM), Mechanics Department, Warsaw, POLAND
Ueda, Kazanuga; National Metrology Institute of Japan (NMIJ), Force and Torque Standards Group, Ibaraki, JAPAN
Zhimin, Zhang; National Institute of Metrology (NIM), Mechanical Metrology Devision, Beijing, CHINA
|
| Quelle/Jahr | Metrologia: 56 (2019), 1A, Tech. Suppl., 1 - 27 |
| Artikelnummer | 07001 |
| ISSN | 0026-1394 (PRINT) ; 1681-7575 (ONLINE) |
| DOI | |
| URL | |
| Verlag | Bristol: IOP Publishing |
| Freie Schlagworte | Force Key Comparison ; high force ; 500 kN ; 1 MN |
| Zusammenfassung | In the Force Key Comparison CCM.F-K3 the measurand force was compared at the two force steps 500 kN and 1 MN. 12 laboratories participated in this comparison which was organised by PTB as the pilot laboratory in two laboratory groups (group A and B). In group A, the comparison was carried out with two 1 MN compression force transducers at the two force steps 500 kN and 1 MN (CCM.F-K3a) and with 6 participating laboratories. In group B, the comparison was carried out with two 500 kN compression force transducers at one force step of 500 kN (CCM.F-K3b) and with 9 participating laboratories. The key comparison reference values were determined as the weighted mean of all results for the two force steps and set to 500 kN and 1 MN, respectively, with the associated uncertainties. The degrees of equivalence were determined for all 12 laboratories for 500 kN compression force and for 6 laboratories for 1 MN compression force. Titel des Orig.-Reports: Final report on the force key comparison CCM.F-K3: measurand force: 0.5 MN, 1MN |
| Themenbereich der Metrologie | Masse und abgeleitete Größen |
Zitierung
Kumme, R., Averlant, P., Bartel, T., Germak, A., Knott, A., Man, J., Medina, N., Ostrivnoy, A., Park, Y.-K., Röske, D., Seifarth, R. L., Wozniak, M., Ueda, K., & Zhimin, Z. (2019). Final report on the force key comparison CCM.F-K3. Metrologia, 56(1A, Tech. Suppl.), 1–27. https://doi.org/10.1088/0026-1394/56/1a/07001