| Zugriffsnummer | 41807 |
| Dokumenttyp | Konferenzartikel in Zeitschrift |
| Peer Review | mit Peer Review |
| Sprache | Englisch |
| Titel | Development of measurement and calibration techniques for dynamic pressures and temperatures (DynPT): background and objectives of the 17IND07 DynPT project in the European Metrology Programme for Innovation and Research (EMPIR) |
| Autor(in); Institution |
Saxholm, Sari; MIKES Metrology, VTT Technical Research Centre of Finland, Espoo, FINLAND
Högström, Richard; MIKES Metrology, VTT Technical Research Centre of Finland, Espoo, FINLAND
Sarraf, Christophe; Ecole Nationale Superieure d'Arts et Metiers, FRANCE
Sutton, Garwin; National Physical Laboratory (NPL), Teddington, UK
Wynands, Robert; 1.3, Geschwindigkeit, PTB-Braunschweig
Arrhén, Fredric; RISE Research Institutes of Sweden, AB, SWEDEN
Jönsson, Gustav; RISE Research Institutes of Sweden, AB, SWEDEN
Durgut, Yasin; National Metrology Institute, Tübitak UME, Gebze, TURKEY
Peruzzi, Andrea; SL, VSL B.V., THE NETHERLANDS
Fateev, Alexander; Technical University of Denmark, Roskilde, DENMARK
Liverts, Michael; Kungliga Tekniska Hoegskolan, SWEDEN
Adolfse, Carel; Minerva meettechniek B.V, THE NETHERLANDS
Öster, Anders; Wärtsilä Finland Oy, FINLAND
|
| Quelle/Jahr | XXII World Congress of the International Measurement Confederation (IMEKO 2018). Journal of Physics: Conference Series: 1065 (2018), 1 - 4 |
| Artikelnummer | 162015 |
| ISSN | 1742-6588 (PRINT) ; 1742-6596 (ONLINE) |
| DOI | |
| Verlag | Bristol: IOP Publ. |
| Konferenzangaben | XXII IMEKO World Congress: Knowledge through Measurement, Belfast, 03-06, September, 2018, UK |
| Zusammenfassung | This project has five specific objectives: To provide traceability for dynamic pressure and temperature through development of measurement standards and validated calibration procedures; To quantify the effects of influencing quantities on the response of dynamic pressure and temperature sensors, in order to determine the appropriate calibration procedures and measurement uncertainties for industrial measurements; To develop new measurement methods and sensors for measuring dynamic pressure and temperature in demanding industrial applications, and to demonstrate the improved accuracy and reliability obtained with those; To validate all of the methods and sensors developed in this project through demonstrations in selected industrial applications; and To ensure by close engagement with industry, that the developed calibration and measurement techniques and technology are adopted by them. The challenge is that in many industrial applications pressure and temperature measurements are performed under dynamically changing conditions. The aim of this project is to improve the accuracy and reliability of pressure and temperature measurements in these challenging conditions. A European joint research project named Development of measurement and calibration techniques for dynamic pressures and temperatures (shortname DynPT) started in the summer 2018. |
| Kostenfreier Zugang | Open Access Gold |
| Rechteinformation | CC BY 3.0 ; Creative Commons Attribution 3.0 License |
| Themenbereich der Metrologie | Masse und abgeleitete Größen |
Zitierung
Saxholm, S., Högström, R., Sarraf, C., Sutton, G., Wynands, R., Arrhén, F., Jönsson, G., Durgut, Y., Peruzzi, A., Fateev, A., Liverts, M., Adolfse, C., & Öster, A. (2018). Development of measurement and calibration techniques for dynamic pressures and temperatures (DynPT): background and objectives of the 17IND07 DynPT project in the European Metrology Programme for Innovation and Research (EMPIR). Journal of Physics: Conference Series, 1065, 1–4. https://doi.org/10.1088/1742-6596/1065/16/162015