| Zugriffsnummer | 41609 |
| Dokumenttyp | Zeitschriftenartikel |
| Peer Review | mit Peer Review |
| Sprache | Englisch |
| Titel | Measurement of gauge blocks by interferometry |
| Autor(in); Institution |
Matus, M.; Bundesamt für Eich- und Vermessungswesen (BEV), Vienna, AUSTRIA
Haas, S.; Bundesamt für Eich- und Vermessungswesen (BEV), Vienna, AUSTRIA
Gavalyugov, V.; Bulgarian Institute of Metrology (BIM), Sofia, BULGARIA
Tamakyarska, D.; Bulgarian Institute of Metrology (BIM), Sofia, BULGARIA
Thalmann, R.; Eidgenössisches Institut für Metrologie (METAS), Bern-Wabern, SWITZERLAND
Balling, P.; Cesky metrologicky institut (CMI), Prague, CZECH REPUBLIC
Garnaes, J.; Danmarks Nationale Metrologiinstitut (DFM), Lyngby, DENMARK
Hald, J.; Danmarks Nationale Metrologiinstitut (DFM), Lyngby, DENMARK
Farid, N.; National Institute for Standards (NIS), Giza, EGYPT
Prieto, E.; Centro Espanol de Metrologia (CEM), Tres Cantos, Madrid, SPAIN
Lassila, A.; VTT MIKES Metrologia, Espoo, FINLAND
Salgado, J. A.; Laboratoire national de metrologie et d'essais (LNE), Paris, FRANCE
Lewis, A.; National Physical Laboratory (NPL), Teddington, UK
Bandis, C.; Hellenic Institute of Metrology (EIM), Thessaloniki, GREECE
Mudronja, V.; Hrvatski mjeriteljski institut (HMI/FSB-LPMD), Zagreb, CROATIA
Banreti, E.; MKEH, Budapest, HUNGARY
Balsamo, A.; Istituto Nazionale di Ricerca Metrologica (INRIM), Torino, ITALY
Pedone, P.; Istituto Nazionale di Ricerca Metrologica (INRIM), Torino, ITALY
Bergmans, R. H.; Nationaal Metrologisch Instituut van Nederland (VSL), Delft, THE NETHERLANDS
Karlsson, H.; Justervesenet - Norwegian Metrology Service (JV), Kjeller, NORWAY
Ramotowski, Z.; Glowny Urzad Miar (GUM), Warsaw, POLAND
Eusebio, L.; Instituto Portugues da Qualidade (IPQ), Caparica, PORTUGAL
Saraiva, F.; Instituto Portugues da Qualidade (IPQ), Caparica, PORTUGAL
Duta, A.; Institutul National de Metrologie (INM), Bucuresti, ROMANIA
Zelenika, S.; Directorate of Measures and Precious Metals (DMDM), Belgrade, SERBIA
Bergstrand, S.; SP Technical Research Institute of Sweden, Boras, SWEDEN
Fira, R.; Slovensky metrologicky ustav (SMU), Bratislava, SLOVAKIA
Yandayan, T.; TÜBITAK-UME National Metrology Institute, Gebze-Kocaeli, TURKEY
Sendogdu, D.; TÜBITAK-UME National Metrology Institute, Gebze-Kocaeli, TURKEY
Ganioglu, O.; TÜBITAK-UME National Metrology Institute, Gebze-Kocaeli, TURKEY
Asli Akgoz, S.; TÜBITAK-UME National Metrology Institute, Gebze-Kocaeli, TURKEY
Franke, Peter; 5.4, Interferometrie an Maßverkörperungen, PTB-Braunschweig
|
| Quelle/Jahr | Metrologia: 53 (2016), Tech. Suppl., 1 - 63 |
| Artikelnummer | 04003 |
| Availability | [online only] |
| ISSN | 0026-1394 (PRINT) ; 1681-7575 (ONLINE) |
| DOI | |
| Verlag | Bristol: IOP Publishing |
| Zusammenfassung | The key comparison EURAMET.L-K1.2011 on gauge blocks was carried out in the framework of a EURAMET project starting in 2012 and ending in 2015. It involved the participation of 24 National Metrology Institutes from Europe and Egypt, respectively. 38 gauge blocks of steel and ceramic with nominal central lengths between 0.5 mm and 500 mm were circulated. The comparison was conducted in two loops with two sets of artifacts. A statistical technique for linking the reference values was applied. As a consequence the reference value of one loop is influenced by the measurements of the other loop although they did not even see the artifacts of the others. This influence comes solely from three "linking laboratories" which measure both sets of artifacts. In total there were 44 results were not fully consistent with the reference values. This represents 10% of the full set of 420 results which is a considerable high number. At least 12 of them are clearly outliers where the participants have been informed by the pilot as soon as possible. The comparison results help to support the calibration and measurement capabilities (CMCs) of the laboratories involved in the CIPM MRA. |
| Themenbereich der Metrologie | Länge, dimensionelle Metrologie |
Zitierung
Matus, M., Haas, S., Gavalyugov, V., Tamakyarska, D., Thalmann, R., Balling, P., Garnaes, J., Hald, J., Farid, N., Prieto, E., Lassila, A., Salgado, J. A., Lewis, A., Bandis, C., Mudronja, V., Banreti, E., Balsamo, A., Pedone, P., Bergmans, R. H., Karlsson, H., Ramotowski, Z., Eusebio, L., Saraiva, F., Duta, A., Zelenika, S., Bergstrand, S., Fira, R., Yandayan, T., Sendogdu, D., Ganioglu, O., Asli Akgoz, S., & Franke, P. (2016). Measurement of gauge blocks by interferometry. Metrologia, 53(Tech. Suppl.), 1–63. https://doi.org/10.1088/0026-1394/53/1a/04003