| Zugriffsnummer | 39694 |
| Dokumenttyp | Konferenzartikel in Zeitschrift |
| Peer Review | mit Peer Review |
| Sprache | Englisch |
| Titel | Creating a multi-material length measurement error test for the acceptance testing of dimensional computed tomography systems [poster] |
| Autor(in); Institution |
Borges de Oliveira, Fabrício; 5.3, Koordinatenmesstechnik, PTB-Braunschweig
Bartscher, Markus; 5.3, Koordinatenmesstechnik, PTB-Braunschweig
Neuschaefer-Rube, Ulrich; 5.3, Koordinatenmesstechnik, PTB-Braunschweig
Tutsch, Rainer; Technische Universität Braunschweig, Braunschweig, GERMANY
Hiller, Jochen; Technische Hochschule Deggendorf, Deggendorf, GERMANY
|
| Quelle/Jahr | 7th Conference on Industrial Computed Tomography (iCT) 2017: proceedings. Journal of Nondestructive Testing and Ultrasonics:(2017), 1 - 12 |
| Availability | [online only] |
| ISSN | 1435-4934 |
| URL | |
| Verlag | Bas Breisig: NDT |
| Konferenzangaben | 7th Conference on Industrial Computed Tomography (iCT 2017), Leuven, 07-09, February, 2017, Belgium |
| Freie Schlagworte | Acceptance testing ; multi-material measurements ; dimensional computed tomography (CT) ; standardization ; length measurement error testing (E-test) |
| Zusammenfassung | Non-destructive testing (e.g. defect detection, material characterization), reverse engineering, fibre orientation, and more recently coordinate metrology represent the broad range of today’s applications of industrial X-ray computed tomography (CT). However, the use of CT as a coordinate measurement system opens up new challenges to technology. This is especially true of dimensional inspections of multi-material assemblies which are characterized as promising, but very demanding applications of CT. The reliability of multi-material CT measurements is still an open issue due to the complexity of multi-material measurements and also because it is not covered in the current guidelines and standard drafts. Thus, this paper presents - as part of a multi-material acceptance test and to create trust in multi-material CT measurement - a new design and concept for multi-material length measurement error testing. It also discusses the test design and procedure based on the first experimental results. The paper attempts to perform a critical analysis of the new reference standard design - a multi-material hole cube - and tries to verify the concept in several steps |
| Kostenfreier Zugang | Freier Zugang |
Zitierung
Borges de Oliveira, F., Bartscher, M., Neuschaefer-Rube, U., Tutsch, R., & Hiller, J. (2017). Creating a multi-material length measurement error test for the acceptance testing of dimensional computed tomography systems [poster]. Journal of Nondestructive Testing and Ultrasonics, 1–12.