Zugriffsnummer 37997
Dokumenttyp Konferenzartikel in Zeitschrift Freier Zugang
Peer Review unbekannt
Sprache Englisch
Titel Preparing system functions for quantitative MPI
Autor(in); Institution
Kosch, Olaf; 8.2, Biosignale, PTB-Berlin
Heinen, U.; Department of Electrical Engineering & Information Technology, University of Applied Sciences, Pforzheim, GERMANY
Wells, James; 8.2, Biosignale, PTB-Berlin
Trahms, Lutz; 8.2, Biosignale, PTB-Berlin
Wiekhorst, Frank; 8.2, Biosignale, PTB-Berlin
Quelle/Jahr International Journal on Magnetic Particle Imaging: 3 (2017), 2, 1 - 7
Artikelnummer 706002
ISSN 2365-9033
DOI
Verlag Lübeck: Infinite Sc. Publishing
Konferenzangaben 7th International Workshop on Magnetic Particle Imaging (IWMPI2017) , Prague, Czech Republic, Prague, 23-24, March, 2017, Czech Republic
Freie Schlagworte quantitative MPI ; system function analysis ; concentration influence
Zusammenfassung Magnetic particle imaging (MPI) pledges to provide quantitative information on the spatial distribution of magnetic nanoparticle (MNP). Using a figure-of-eight shaped hosepipe phantom filled with the MPI Tracer Ferucarbotran (Resovist precursor), we investigated the quantification capability of a commercial preclinical MPI-scanner (Bruker/Philips Preclinical MPI System, Germany) operated at Charité university hospital, Berlin. For reconstruction of the measured MNP distribution, we used a set of four system functions (SF) acquired with a tracer reference at different iron concentrations (in the range 0.1 mol/L to 1 mol/L). From the analysis of a selected region of interest in the reconstructed images, we found a linear relation between voxel values and the inverse of the concentration of the corresponding reference used in the particular SF acquisition. Based on the precisely known total tracer quantity, we analyzed the MPI image to find the amount of tracer present in each voxel of the phantom. This result was found to be independent of the concentration of the reference sample used in the SF acquisition.
Kostenfreier Zugang Freier Zugang
Rechteinformation CC BY 4.0 ; Creative Commons Attribution 4.0 License ; Original article under Creative Commons Attribution 4.0 International License

Zitierung

Kosch, O., Heinen, U., Wells, J., Trahms, L., & Wiekhorst, F. (2017). Preparing system functions for quantitative MPI. International Journal on Magnetic Particle Imaging, 3(2), 1–7. https://doi.org/10.18416/ijmpi.2017.1706002

Exportieren

PTB-Publica Menü

Sprache wechseln: uk flag