| Zugriffsnummer | 33802 |
| Dokumenttyp | Konferenzartikel in Zeitschrift |
| Sprache | Englisch |
| Titel | Performance of a modular wideband HVDC reference divider for voltages up to 1000 kV |
| Autor(in); Institution |
Hällström, Jari; Centre for Metrology, VTT Technical Research Centre of Finland, Espoo, FINLAND
Bergman, Anders; SP Technical Research Institute of Sweden, Borås, SWEDEN
Dedeoğlu, Serkan; TÜBİ TAK National Metrology Institute, Gebze, TURKEY
Elg, Alf-Peter; SP Technical Research Institute of Sweden, Borås, SWEDEN
Houtzager, Ernest; VSL Dutch Metrology Institute, Delft, THE NETHERLANDS
Klüss, Joni; Aalto University, Espoo, FINLAND
Lehtonen, Tapio; Centre for Metrology, VTT Technical Research Centre of Finland, Espoo, FINLAND
Lucas, Wolfgang; 2.3, Elektrische Energiemesstechnik, PTB-Braunschweig
Meisner, Johann; 2.3, Elektrische Energiemesstechnik, PTB-Braunschweig
Merev, Ahmet; TÜBİ TAK National Metrology Institute, Gebze, TURKEY
Nieminen, Tatu; Aalto University, Espoo, FINLAND
Schmidt, Matthias; 2.3, Elektrische Energiemesstechnik, PTB-Braunschweig
Suomalainen, Esa-Pekka; Centre for Metrology, VTT Technical Research Centre of Finland, Espoo, FINLAND
Weber, Christian; Trench Switzerland and France, Saint Louis, FRANCE
|
| Quelle/Jahr | IEEE Transactions on Instrumentation and Measurement: 64 (2015), 6, 1390 - 1397 |
| ISSN | 0018-9456 |
| DOI | |
| Verlag | Piscataway, NJ: IEEE |
| Konferenzangaben | Conference on Precision Electromagnetic Measurements (CPEM) 2014, Rio de Janeiro, 24-29, August, 2014, Brazil |
| Freie Schlagworte | high-voltage techniques ; HVDC transmission ; measurement techniques ; measurement uncertainty ; voltage measurement ; wideband ; high voltages |
| Zusammenfassung | This paper describes the design and performance of a modular wideband high-voltage dc (HVDC) reference divider with a ratio uncertainty of less than 0.005% at 1000 kV. The divider has a maximum nominal voltage of 1000 kV when five 200-kV modules are stacked on top of each other. The divider is used for traceable calibration of HVDC measuring systems in customers' laboratories. The first priority in the design was the accuracy of HVDC measurements. In addition, the divider was designed to have wide bandwidth, both to enable measurement of ripple voltages and to prevent damage during possible flashovers. |
Zitierung
Hällström, J., Bergman, A., Dedeoğlu, S., Elg, A.-P., Houtzager, E., Klüss, J., Lehtonen, T., Lucas, W., Meisner, J., Merev, A., Nieminen, T., Schmidt, M., Suomalainen, E.-P., & Weber, C. (2015). Performance of a modular wideband HVDC reference divider for voltages up to 1000 kV. IEEE Transactions on Instrumentation and Measurement, 64(6), 1390–1397. https://doi.org/10.1109/tim.2015.2408795