| Zugriffsnummer | 15586 |
| Dokumenttyp | Konferenzartikel |
| Sprache | Englisch |
| Titel | Stability of the 32 mn force calibration machine and industrial applications |
| Autor(in); Institution |
Marinescu, Andrei; ICMET National R&D Testing Institute, Craiova, ROMANIA
Opran, Gheorghe; ICMET National R&D Testing Institute, Craiova, ROMANIA
Popa, Dorin; ICMET National R&D Testing Institute, Craiova, ROMANIA
Sawla, Amritlal; 1.12, Kraft, PTB-Braunschweig
Haucke, Günther; 1.12, Kraft, PTB-Braunschweig
|
| Quelle/Jahr | Joint International Conference IMEKO TC3/TC5/TC20 : proceedings of the International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the age of globalization:(2002), 631 - 636 |
| Schriftenreihe | VDI-Berichte: 1685 |
| ISSN | 0083-5560 |
| ISBN | 3-18-091685-0 |
| Verlag | Düsseldorf: VDI-Verlag |
| Konferenzangaben | Joint International Conference IMEKO TC3/TC5/TC20, Celle, 24-26, September, 2002, Germany |
| Zusammenfassung | In 1997 the High Force Calibration Laboratory from ICMET Craiova was accredited by DKD. The laboratory has a metrological test and calibration machine for the range 0.5 MN to 32 MN and the traceability to the German standard is ensured by means of periodic checks with 2 MN, 5 MN and 16 MN transfer standards of PTB and 2 MN and 10 MN transfer standards of ICMET. The paper contains a short presentation of the 32 MN machine, the results of its periodical checks performed within 1995-2002. A special attention is paid to the tests performed in 2001 with 2 MN and 16 MN PTB transfer standards according to EN 10000/3-94 and DKD procedure, as well as the tests of measuring equipment used in industrial applications. The aim of these tests was to check the long-term stability of the metrological performances of the machine reference measuring system. |
